Layer 01
UV Coating
A clear top coat that shields the print layer from sun fading and surface stains, finished with a non-yellowing aluminum oxide.
Every plank is a multi-layer composite, engineered to be tougher, quieter, faster to install, and far more beautiful than legacy hardwood, laminate, or peel-and-stick vinyl.
A clear top coat that shields the print layer from sun fading and surface stains, finished with a non-yellowing aluminum oxide.
A heavy-duty 0.5 mm wear surface with embossed-in-register texture. The gold standard for high-traffic homes and light commercial use.
Photo-realistic wood pattern printed at high DPI, with the texture pressed into perfect alignment with the grain.
Stone Plastic Composite. A dimensionally stable, 100% waterproof core that resists temperature swings, humidity and impact.
1mm closed-cell IXPE foam, pre-attached for soundproofing, comfort underfoot and additional moisture protection.
An angle-angle click-locking system engineered to prevent gaps, lift, and squeaks, even after years of heavy use.
Valinge 2G is a robust click-locking system engineered for secure, glue-free flooring installation. It features sturdy horizontal and vertical locking suitable for resilient and vinyl flooring.
The system uses an angle-angle method to prevent gaps and height differences, for a strong, reliable, long-lasting result.
IXPE (Irradiated Cross-Linked Polyethylene) foam is a premium, high-density, closed-cell underlayment that provides superior sound reduction, moisture protection, and comfort underfoot for floating floors.
It is the standard recommendation for SPC and LVT vinyl flooring, and comes pre-attached to every 50 States plank.
High-quality SPC luxury vinyl with a thick 20 mil wear layer is highly scratch-resistant, making it ideal for pets, kids, and high-traffic areas. Our embossed-in-register texture also masks micro-scratches better than high-gloss laminates.
A typical 200 sq ft room can be installed in a single afternoon. No glue, no nails, no specialty tools required.
Clean, level (≤ 3/16" over 10ft) and dry. Remove old flooring or install over existing tile, vinyl, or concrete.
Maintain a ≥ 10 mm expansion gap from all walls and fixed objects. Use spacers as you work.
Angle the long side first, lower into place, then click the short end. Repeat row by row in a staggered pattern.
Replace baseboards or add quarter-round, install transitions, and you're done. No drying. No off-gassing wait.